Stretch Blow Molder-Maticline Industries

Maticline's Pitch Changing Linear PET Stretch Blow Molding Machine.

Pitch changing means minimized preform pitch over heating (e.g. 38mm) changes to be bigger cavity pitch over blowing (e.g. 76.2mm or 120mm). This new design of linear stretch blow molder minimizes lamp heat loss, saving a lot of electricity. Preforms stand upward over heating from loading to blow molding, saving traditional downward turning mechanisms, reducing circle time and potential maintenance cost.

Mold locking strength up to 50bar, enabling blowing pressure to reach 40bar if needed;

The higher blowing pressure will enable the blower to produce light-weighting PET bottles without compromising bottle’s physical strength, at the same time with more shining effects of the PET bottles. While, the traditional linear stretch blow molder’s maximum blowing pressure is only 35bar and some cheap blowers, only 30bar.

Maximum speed up to 2600BPH per cavity based on 500ml round bottle at 16grams;

Only 1500BPH per cavity by traditional linear lower.

Super-penetrating infrared lamps, heating preforms inside and outside simultaneously, saving heat transfer time, avoiding heat impact to preform neck;

The traditional linear stretch blow molder heat only the outside parts of the preforms and the inside parts need to be cooked up through gradual heat transfer, consuming more energy and time.

Advanced

Advanced servo system controlled pitch changing mechanism, fast and precise, enabling stable long time operation;
Efficient

Centralized hot air management system, efficient and effective, free of problems resulted from hot air impact.
Energy saving

Energy Consumption per bottle for our Pitch Changing Linear Stretch Blow Molder is Just 2watts based on 75cl.

Learn more about our LS Blow Molder series by CLICKING HERE or contact us below..

		MATICLINE LS SERIES MACHINES TABLE
				Unit		LS1G	LS2G	LS3	LS4	LS6	LS6	LSS7	LS8	LSS9
MOLDING	Clamping force			KG		64000	128000	64000	64000	64000	64000	56000	72000	64000
	Clamping stroke			mm		320	320	320	130	130	130	130	130	130
	Stretching stroke			mm		500	500	500	320	320	240	320	320	240
	Bottom stroke			mm		50	50	50	50	50	50	50	50	50
	Cavity pitch			mm			320	230	120	114.3	76.2	80	120	76.2
	Number of cavities			mm		1	2	3	4	6	6	7	8	9
	Spindle chain pitch			mm		76	76	60	38.1	38.1	38.1	38.1	38.1	38
CONTAINER	Max.capacity			Liter		12-20L	12-20L	5L	2.2L	1.5L	0.75L	0.75L	2L	0.6L/1.5L
	Neck inner diameter			mm		55	55	50	30	30	30	30	30	30
	Max. diameter			mm		290	290	175	110	105	69	70	95	69
	Max. height			mm		500	500	350	320	320	240	320	320	240
	Carriage unit			Pcs		68	94	107	68	102	102	133	120	160
THEORTICAL OUTPUT						450-600	800-1200	3600(5L)	9300(0.5L)	12000(0.6L) 9000(1.5L)	14000(0.6L) 4500(1.5L)	16400（0.6L）	14400（0.6L） 11000（1.5L）	24000(0.5L)
ELECTRICAL SYSTEM			Number of oven	units		4	6	4	2	2	2	2	4	4
			Total power	kw		80	90	80	42	43	43	39	67	63
			Heating oven real power	kw		30	48	45	26	25	25	34	62	50
			Servo power	kw		9	15	8	9	11	11	11	11	11
			Total installation power	kw		100	100	90	51	50	50	50	78	74
AIR SYSTEM			Blowing pressure	kg/cm		35	30	35	35	35	35	35	35	35
AIR SYSTEM			Air consuming	L/min		6800	13600	9500	3300	6000	6000	8200	10000	14000
CHILLER WATER			Operating pressure	kg/cm		4	4	6-10	6-10	6-10	6-10	6-10	6-10	6-10
			Temperature	c		10-12	10-12	10-12	10-12	10-12	10-12	10-12	10-12	10-12
			Consuming	kcal/hr		26040	26040	12000	22682	22682	22682	10000	17045	22682
			Flow rate	ltr/cm		100	100	90	110	160	160	150	160	160
COOLING WATER			Operating pressure	kg/cm		2-4	2-4	5-6	5-6	5-6	5-6	5-6	5-6	5-6
			Temperature	c		30	30	25	25	25	25	25	25	25
			Consuming	kcal/hr		78000	78000	54000	24000	24000	24000	45000	10400	24000
			Flow rate	L/min		260	260	150	22	22	22	22	22	22
MACHINE			Size(LWH)	m		6.533.7	543.7	6.533.7	51.62.7	71.32.7	61.32.7	4.71.653	72.023.5	101.32.7
MACHINE			Weight	kg		8000	10000	8000	4500	6000	5500	7000	12000	9000
					Note：All parameters are based on 500ml water bottles at 15grams. When the bottles differ, the parameter will have corresponding changes. Due to limited space, our machine models are only partially presented. The technical parameters here are only for reference and up to confirmation at inquiry and final contract.

Like(0)Like(0)

* Country
* Address
* Name	Surname
* Mobile phone
* Phone verification code
* Email
* Product
* Demand Description